Avional®-100 thick plates are used mainly for machine construction and apparatus subject to static or dynamic loading.
Typical applications of Avional®-100 include various supports and structural parts of machines.
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti+Z |
---|---|---|---|---|---|---|---|
0.20 0.80 |
max 0.7 |
3.5 4.5 |
0.4 1.0 |
0.4 1.0 |
max 0.10 |
max 0.25 |
max 0.25 |
Density | 2.78 g/cm3 |
---|---|
Elastic modulus | 72000 MPa |
Lin. thermal expansion coefficient (20°-100°C) | 23.6 10-6 K-1 |
Thermal conductivity (Temper T451) | 125 -140 W/mK |
Electrical conductivity at 20°C (Temper T451) | 19 - 21 MS/m |
TIG/MIG | difficult |
---|---|
by resistance | difficult |
Anodizing technical | good |
---|---|
Anodizing decorative | moderate |
Avional®-100 plates are available in temper T451 (quenched - stretched - naturally aged) in the following dimensions:
Thickness (over... to) |
Max. Width |
---|---|
3.4 - 6.5 mm | 1520 mm |
7.9 - 60 mm | 2020 mm |
61 - 70 mm | 2000 mm |
71 - 80 mm | 1820 mm |
81 - 90 mm | 1520 mm |
91 - 102 mm | 1350 mm |
102 - 110 mm | 1120 mm |
111 - 120 mm | 1020 mm |
(other dimensions on request)
Thickness (over... to) |
Rm [MPa] |
Rp0.2 [MPa] |
A50 [%] |
---|---|---|---|
3.4 - 6.0 mm | 390 | 245 | 15 |
6.0 - 12.5 mm | 390 | 260 | 13 |
12.5 - 40 mm | 390 | 250 | 12 |
40 - 60 mm | 385 | 245 | 12 |
60 - 80 mm | 370 | 240 | 7 |
80 - 120 mm | 360 | 240 | 6 |
Thickness (over... to) |
Rm [MPa] |
Rp0.2 [MPa] |
A50 [%] |
HB |
---|---|---|---|---|
3.4 - 6.5 mm | 420 | 265 | 20 | 125 |
7.9 - 25 mm | 415 | 270 | 10 | 125 |
25 - 60 mm | 415 | 265 | 20 | 125 |
60 - 120 mm | 415 | 265 | 17 | 125 |
Heating the alloy can result in loss of strength of properties or of capability for fabrication, assembly or application in a particular case. Whenever a new application of this alloy is contemplated, and if this application involves special properties such as corrosion resistance, toughness, fatigue strength, it is strongly recommended that the user should consult the producer in order to make a precise and appropriate selection of the material.
The information in this publication does not imply a guarantee of properties or of capability for fabrication, assembly or application in a particular case. The appendix to technical datasheets is an integral part of this datasheet. The processing instructions presented in the appendix shall be taken into account by the user. This edition replaces all previous editions.
Italferro si trova a Gambolò (PV), in viale Industria 36/38.
I nostri uffici sono aperti, dal lunedì al venerdì dalle 8.30 alle 12.00 e dalle 13.30 alle 18.00.
Il magazzino è aperto, dal lunedì a venerdì, dalle 8.00 alle 11.30 e dalle 13.30 alle 16.30.
viale Industria 36/38
27025 Gambolò (PV)